BENTLY NEVADA 330905-00-21-05-02-CN 3300 NSv Probe

BENTLY NEVADA 330905-00-21-05-02-CN 3300 NSv Probe

BENTLY NEVADA 330905-00-21-05-02-CN Specification

Manufacturer:BENTLY NEVADA
Product Type:3300 NSv Probe
Model:330905-00-21-05-02-CN 
Probe Type: Eddy current proximity probe
Thread Configuration: M10X1 (customizable)
Cable: 2.0 meters FluidLoc cable for fluid protection
Cable Resistance: 0.220 Ω/m (center), 0.066 Ω/m (shield)
Capacitance: 69.9 pF/m
Operating Temp: -52°C to +177°C
Storage Temp: -52°C to +105°C
Gap Setting: 1.0 mm (40 mils)

BENTLY NEVADA 330905-00-21-05-02-CN Description

The primary uses for the 3300 XL NSv Transducer System are for areas where 

counter bore, sideview or rearview restrictions limit the use of standard Bently 

Nevada 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for 

small target applications, such as measuring radial vibration on shafts smaller than 

51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It is 

primarily used in the following applications on fluid-filmed bearing machines 

where a small shaft or reduced side-view is present:
• Radial vibration and radial position measurements
• Axial (thrust) position measurements
• Tachometer and zero speed measurements
• Phase reference (Keyphasor) signals.

The 3300 XL NSv Transducer System design allows it to replace both the 3300 

RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer 

System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may 

use the existing probe, extension cable, and monitoring system with 3300 XL 

NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer 

System must replace the probe, extension cable and Proximitor Sensor with 

NSv components.

The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm 

(200 mV/mil), which is the most common output for eddy current transducers. Its 

enhanced side-view and small target characteristics give it a shorter linear range than 

the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System. With The 1.5 mm 

(60 mils) of linear range exceeds the linear range of the 3000-series 190 Transducer 

System.

The short information:

:plc@mvme.cn      :+86 18030170117      :+86 18030170117

Whole sale pictures

About our company:

We are the supplier for industrial spare parts.We specialize in PLC module, DCS card 

pieces, ESD system card pieces, vibration monitoring system card pieces, steam 

turbine control system module, gas generator spare parts, we have established the 

relationship with famouse PLC DCS product maintenance service providers in the world.

Service Advantages：

-Prompty reply you within 24 hours
-Fast delivery time
-100% quality assurance
-1 Year warranty
Have been in the line for many
years,has a good reputation

Something You Might Need：

Disclaimer:
Plcnew sells new and surplus products and develops channels to purchase such products.
This site is not approved or endorsed by any of the listed manufacturers or trademarks.
Plcnew is not an authorized distributor, dealer or representative of the products displayed on this site.
All product names, trademarks, brands and logos used on this site are the property of their respective owners.
The description, illustration or sale of products under these names, trademarks, brands and logos is 

for identification purposes only and is not intended to indicate any affiliation with or authorization 

by any rights holder.